Cavity Wall Insulation Remedial

Cavity insulation remedial work is for fill that is holding moisture or bridging the cavity, after the wall has been surveyed. It is for insulated cavity houses in England, Scotland, and Wales, not a new insulation install. Send the quote form or WhatsApp with the postcode.

Cavity Wall Insulation Remedial

Included and excluded

Cavity Wall Insulation Remedial

What it is

Fill in the cavity can sit against debris, cross the damp-proof course, or stay wet because the outer leaf lets rain in. The damp shows inside, often as patches rather than a neat tide mark.

  • Cavity walls, not solid brick
  • Damp that appeared after the cavity was filled
  • Saturated or slumped insulation
  • A survey of the wall construction first

Extraction is not automatic

Some cavities should not have been filled. Some damp is pointing and gutters, and the insulation is dry. We do not empty a wall on a guess.

  • Booscope or an agreed opening-up
  • Rainwater defects repaired either way
  • Extraction only where the fill is part of the damp
  • The wall left so it can dry

What the quote covers

The investigation, removal if it is justified, making good the drill points, and the outside repairs that were letting rain into the cavity.

  • Elevation by elevation
  • Not a whole-house extract by default
  • Repointing or gutters if they are the cause
  • Internal plaster only where it has failed

What this is not

We do not install cavity insulation on this service. We also do not inject a damp-proof course into a cavity wall and call the insulation problem solved.

  • Not a government-grant top-up
  • Not solid-wall insulation
  • Not a substitute for failed pointing

Signs on the building

Cavity Wall Insulation Remedial

Narrow or dirty cavities

Mortar droppings and a narrow cavity let fill bridge the two leaves. Moisture then tracks inside.

  • Seen before any extract is priced
  • Bridging at the course line
  • Local extraction where the bridge is local

Exposed elevations

A weather-facing wall with open joints soaks the outer leaf. Fill against that leaf stays wet.

  • Pointing repaired
  • Fill assessed after the leaf can shed rain
  • Not every cold wall is a cavity fault

Around openings

Poorly closed cavities at windows track water to the reveal. The reveal is often the first internal stain.

  • Reveals checked
  • Sills and seals
  • Fill only if it is in that path

Below the damp-proof course

Fill taken down below the course can connect wet ground to the inner leaf. That is a bridge, not “a bit of damp”.

  • Course line found
  • Fill stopped or removed at that line
  • Ground levels checked as well

The stain inside

The wet patch should line up with a bridge or a soaked outer leaf. Fill is not blamed by default.

  • Location recorded
  • Survey before any extract
  • Matched to the outside defect

After the fill comes out

The outer leaf still has to shed rain. Pointing or a gutter is repaired when that is what soaked the fill. Dry, stable fill is left in place.

  • Pointing and rainwater goods
  • Time for the wall to dry
  • Only the failed fill is removed

How It Works

Solid walls do not get this service. The construction is checked before any talk of extraction.

1

Confirm the wall is a cavity

Solid walls do not get this service.

2

See whether the fill is wet or bridging

We look in the cavity.

3

Stop rain entering the outer leaf

Pointing, render, and gutters are repaired when they are feeding the cavity.

4

Remove fill only where it is part of the defect

Extraction is limited to the insulation that is bridging or holding water.

5

Make good and let the wall dry

Drill points are closed.

6

Guarantee the remedial work described

The treatment named in the written quote carries a 30-year guarantee.

Pricing Plans

Investigation, extraction, and outside repairs are separate lines. Emptying a dry cavity is not something we quote as a remedy. The price follows the area that is actually bridged or saturated, plus the pointing or gutters that let the rain in.

  • Whether the fill is wet, slumped, or bridging
  • Square metres to extract, if any
  • Outside repairs on that elevation
  • Internal plaster that has already failed

Cavity Wall Insulation Remedial FAQs

Questions that decide whether this is the right job.

No. Dry, stable fill that is not bridging is not the defect. Taking it out of a sound wall is not a damp repair.

A cold wall can be solid brick, missing heat, or condensation. The construction is checked before anyone talks about extraction.

This service is the remedial damp work. A new insulation install is not part of the quote.

No. A course at the base of the wall does not dry a wet cavity above it.

Book a damp survey

Tell us the floor, whether it follows rain, and the postcode. The quote follows the survey.

Get Your Free Quote

Related damp work

Areas we cover

Surveys run in Kent, Cardiff, and Glasgow, and in the other counties and towns on the areas page.

Kent, Cardiff, and Glasgow

Contact Us

Name the room, the floor, and what the wall is doing. WhatsApp takes the same details.

Thank you for your message! We will get back to you soon.
Something went wrong.